The clinical performances of dental materials depend on their mechanical profiles, determining their long-term deformation and wear resistance. This paper describes a study on the mechanical properties, water absorption and morphological properties of a polymethyl methacrylate (PMMA) resin enriched with graphene-silver nanoparticles (Gr-Ag). Two different concentrations—1 and 2 wt.%—of Gr-Ag were loaded into the PMMA material. For the mechanical characterization, the compression behavior, flexural strength and tensile strength were evaluated. Optical microscopy in polarized light and scanning electron microscopy were used for filler analysis. The filler addition led to an improvement in all mechanical properties, with slight changes being derived from the filler content variation. Gr-Ag use led to an increase in the applied maximum loads. Moreover, 1 wt.% Gr-Ag determined an increase of 174% in the modulus of rupture, which indicates high flexibility.

No abstract

The oral microbiome, forming a biofilm that covers the oral structures, contains a high number of microorganisms. Biofilm formation starts from the salivary pellicle that allows bacterial adhesion–colonization–proliferation, co-aggregation and biofilm maturation in a complex microbial community. There is a constant bidirectional crosstalk between human host and its oral microbiome. The paper presents the fundamentals regarding the oral microbiome and its relationship to modulator factors, oral and systemic health. The modern studies of oral microorganisms and relationships with the host benefits are based on genomics, transcriptomics, proteomics and metabolomics. Pharmaceuticals such as antimicrobials, prebiotics, probiotics, surface active or abrasive agents and plant-derived ingredients may influence the oral microbiome. Many studies found associations between oral dysbiosis and systemic disorders, including autoimmune diseases, cardiovascular, diabetes, cancers and neurodegenerative disorders. We outline the general and individual factors influencing the host–microbial balance and the possibility to use the analysis of the oral microbiome in prevention, diagnosis and treatment in personalized medicine. Future therapies should take in account the restoration of the normal symbiotic relation with the oral microbiome.

(1) Background: Poor hygiene and denture presence in the oral cavity are factors that favor bacterial accumulation, the cause of halitosis and of various oral and general diseases. Aim: This study aimed to evaluate the possibility of inactivating bacteria associated with halitosis in acrylic denture wearers using polymethyl methacrylate resin enhanced with graphene silver nanoparticles and the effect of the resin association with extra oral photodynamic therapy. (2) Methods: Graphene silver nanoparticles in 1 and 2 wt% were added to a commercial acrylic resin powder. Three study groups containing samples from the three different materials were established. The first group was not exposed to the light treatment, and the other two were exposed to red light (laser and light emitting diode) after photosensitizer placement on the disk’s surface. Samples were incubated with Porphyromonas gingivalis and Enterococcus faecalis. (3) Results: For both bacterial strains, inhibition zones were obtained, showing significant differences for the light-treated samples. (4) Conclusions: Denture resins with antibacterial properties associated with extra oral photodynamic therapy exhibited enhanced antibacterial effects. The procedure could be used as a safer and more efficient alternative technique against halitosis and oral infections in denture wearers.

The metal-ceramic fixed partial prosthesis is the golden standard for posterior tooth restorations. Following the demands of patients and clinicians for metal-free restorations, all-ceramic materials were developed as they offer an adequate alternative with better optical qualities and good mechanical properties. This study aims to carry out a bibliographic review to assess the survival rate and the biological and technical complications of all-ceramic and metal-ceramic fixed partial dentures. An electronic search for articles in the English language literature was performed using PubMed (MEDLINE). This literature review focused on research studies between 2010 and 2020 that performed clinical studies on tooth-supported fixed partial dentures with a mean follow-up of at least 3 years. All the studies, which analyzed the survival and complications of tooth-supported fixed partial dentures, were included. Thus, 14 studies reporting on 756 all-ceramic and 160 metal-ceramic fixed partial dentures met the inclusion criteria. A comparative analysis was carried out based on all the data existing in the studies included in this review. The metal-ceramic fixed partial dentures showed survival rates of 95% to 100% at 3-, 5-, and 10-year follow-up periods. Zirconia fixed partial dentures were reported to have survival rates of 81% to 100% at 3-, 5-, 9-, 10-year follow-up evaluations. The reinforced glass-ceramic fixed partial dentures showed survival rates of 70% to 93.35% at 5 years, while the alumina FPDs showed a survival rate of 68% at 3 years follow-up. The incidence of caries and loss of vitality were reported as higher for all-ceramic prostheses as compared to the metal-ceramic ones. A significant framework fracture was reported for glass-infiltrated alumina fixed partial dentures in comparison to metal-ceramic fixed partial dentures. All-ceramic and metal-ceramic restorations showed similar survival rates after 3 years, although all-ceramic restorations have problems with technical complications such as chipping, which can lead to framework fractures over time.