No abstract

We provide a theoretical analysis of the relative merits of tensile strain and n-type doping as approaches to realizing an efficient low-power germanium laser. Ultimately, tensile strain offers threshold reductions of over 200x, and significant improvements in slope efficiency compared with the recently demonstrated 0.25% strained electrically pumped germanium laser. In contrast, doping offers fundamentally limited benefits, and too much doping is harmful. Moreover, we predict that tensile strain reduces the optimal doping value and that experimentally demonstrated doping has already reached its fundamental limit. We therefore theoretically show large (9 1%) tensile strain to be the most viable path to a practical germanium-on-silicon laser.

Semiconductor heterostructures play a vital role in photonics and electronics. They are typically realized by growing layers of different materials, complicating fabrication and limiting the number of unique heterojunctions on a wafer. In this Letter, we present single-material nanowires which behave exactly like traditional heterostructures. These pseudoheterostructures have electronic band profiles that are custom-designed at the nanoscale by strain engineering. Since the band profile depends only on the nanowire geometry with this approach, arbitrary band profiles can be individually tailored at the nanoscale using existing nanolithography. We report the first experimental observations of spatially confined, greatly enhanced (>200×), and wavelength-shifted (>500 nm) emission from strain-induced potential wells that facilitate effective carrier collection at room temperature. This work represents a fundamentally new paradigm for creating nanoscale devices with full heterostructure behavior in photonics and electronics.

This work presents a novel method to introduce a sustainable biaxial tensile strain larger than 1% in a thin Ge membrane using a stressor layer integrated on a Si substrate. Raman spectroscopy confirms 1.13% strain and photoluminescence shows a direct band gap reduction of 100meV with enhanced light emission efficiency. Simulation results predict that a combination of 1.1% strain and heavy n(+) doping reduces the required injected carrier density for population inversion by over a factor of 60. We also present the first highly strained Ge photodetector, showing an excellent responsivity well beyond 1.6um.

We demonstrate room-temperature electroluminescence (EL) from light-emitting diodes (LED) on highly strained germanium (Ge) membranes. An external stressor technique was employed to introduce a 0.76% bi-axial tensile strain in the active region of a vertical PN junction. Electrical measurements show an on-off ratio increase of one order of magnitude in membrane LEDs compared to bulk. The EL spectrum from the 0.76% strained Ge LED shows a 100nm redshift of the center wavelength because of the strain-induced direct band gap reduction. Finally, using tight-binding and FDTD simulations, we discuss the implications for highly efficient Ge lasers.