The International Marine Organization (IMO) has a goal of reaching 40% reduction of GHG emissions by 2030 and target of a full 50% reduction in marine fleet wide GHG emissions by 2050, while other organizations and governments desire to develop a path to Net-Zero GHG emissions by no later than 2050. To accomplish this, engines with near zero GHG emissions must be developed now. In addition to new ships, there is a large existing fleet of diesel fueled engines in the market today which are candidates for retrofit. Ammonia fueling of a diesel engine using dual-fuel combustion represents a viable zero-carbon fuel and combustion strategy suitable for long-haul / heavy-duty transportation due to its favorable storage properties of liquid at low tank pressure. The challenge, however, is ammonia is hard to ignite, slow to burn, and cool when it does burn which creates a significant challenge from a combustion point of view. Conventional dual fuel (CDF) will not be able to burn more than 50% NH3-Diesel ratios efficiently with acceptable combustion quality, thus, combustion enhancement is required to get ammonia to ignite and burn at higher substitution rates. Woodward has developed a fueling and combustion control strategy using diesel pilot injection as the ignition source and combustion accelerant. And using RCCI combustion (Reactivity Controlled Compression Ignition) controlled by Active Combustion Control (ACC) high ammonia-diesel substitution ratios (GSR) is demonstrated to burn as fast or faster than the baseline diesel. With the proportional reduction of carbon in the fuel and an appropriate ammonia slip catalytic technology, it is demonstrated that ammonia can be used as a GHG reduction fuel in dual-fuel diesel engines which can contribute to reduction in GHG emissions proportional to the NH3 substitution ratio. This is a technology which can be deployed today on both retrofit of existing engines as well as on new engines to meet the marine fleet average GHG emissions goals.

Increasingly restrictive limits on NOx levels are driving the change from lean-burn to stoichiometric combustion strategies on heavy-duty on-highway natural gas engines in order to take advantage of inexpensive and effective three-way catalyst technology. The change to stoichiometric combustion has led to increased tendency for engine knock due to higher in-cylinder temperatures. Exhaust Gas Recirculation (EGR) has been proposed as a method to suppress knock via charge dilution while maintaining a stoichiometric air-fuel ratio. Two of the more common EGR driving architectures and the challenges associated with each architecture are described. A series of engine tests were devised and performed on a 7-liter heavy-duty natural gas engine to explore the relationships between EGR knock suppression and engine backpressure. A unique concept for an external EGR pumping cart which allowed for the exploration of higher EGR rates independent of backpressure is also described. Results showed that for the conditions tested, increasing EGR rates beyond a certain point did not result in decreased knock tendency. 1D Simulation showed that the effectiveness of the EGR is limited by trapped hot residual gasses which resulted in higher in-cylinder temperatures and nullified the cooling effects of the EGR. These results suggest that attention must be paid to reducing backpressure via efficient EGR system architecture design in order to achieve the highest possible efficiency.

No abstract

The goal of this study is to address fundamental limitations to achieving diesel-like efficiencies in heavy duty on-highway natural gas (NG) engines. Engine knock and misfire are barriers to pathways leading to higher efficiency engines. This study explores enabling technologies for development of high efficiency stoichiometric, spark ignited, natural gas engines. These include design strategies for fast and stable combustion and higher dilution tolerance. Additionally, advanced control methodologies are implemented to maintain stable operation between knock and misfire limits. To implement controlled end-gas autoignition (C-EGAI) strategies a Combustion Intensity Metric (CIM) is used for ignition control with the use of a Woodward large engine control module (LECM). Tests were conducted using a single cylinder, variable compression ratio, cooperative fuel research (CFR) engine with baseline conditions of 900 RPM, engine load of 800 kPa indicated mean effective pressure (IMEP), and stoichiometric air/fuel ratio. Exhaust gas recirculation (EGR) tests were performed using a custom EGR system that simulates a high pressure EGR loop and can provide a range of EGR rates from 0 to 40%. The experimental measurements included the variance of EGR rate, compression ratio, engine speed, IMEP, and CIM. These five variables were optimized through a Modified BoxBenken design Surface Response Method (RSM), with brake efficiency as the merit function. A positive linear correlation between CIM and f-EGAI was identified. Consequently, CIM was used as the feedback control parameter for C-EGAI. As such, implementation of C-EGAI effectively allowed for the utilization of high EGR rates and CRs, controlling combustion between a narrower gap between knock and lean limits. The change from fixed to parametric ignition timing with CIM targeted select values of f-EGAI with an average coefficient of variance (COV) of peak pressure of 5.4. The RSM efficiency optimization concluded with operational conditions of 1080 RPM, 1150 kPa IMEP, 10.55:1 compression ratio, and 17.8% EGR rate with a brake efficiency of 21.3%. At this optimized point of peak performance, a f-EGAI for C-EGAI was observed at 34.1% heat release due to auto ignition, a knock onset crank angle value of 10.3° aTDC and ignition timing of −24.7° aTDC. This work has demonstrated that combustion at a fixed f-EGAI can be maintained through advanced ignition control of CIM without experiencing heavy knocking events.

Next generation passive prechamber spark plugs for high BMEP natural gas engines require long ignition delay for durability, fast combustion for efficiency, and low COV for lean engine operation. Additionally, a successful plug should have long life, low cost, and have a robust knock margin, with best-in-class NOx vs. fuel consumption. This paper discusses the underlying physics of the novel passive prechamber spark plug, the Woodward–Lean Quality Plug (WW-LQP.) The WW-LQP has demonstrated good ignition delay, fast combustion, and low COV at λ > 1.8+, while improving fuel consumption by more than 1% on a lean natural gas engine. The key operating principles are developed for achieving complete combustion of the prechamber “charge”, leading to high prechamber pressure rise and resulting in high velocity turbulent flame jets, which in-turn provides for fast combustion in the main chamber. The design physics are verified by CFD simulations and on-engine experiments, including pressure measurements in both the prechamber and main combustion chamber.