No abstract

The interest in bioprinting of sustainable biomaterials is rapidly growing, and lignocellulosic biomaterials have a unique role in this development. Lignocellulosic materials are biocompatible and possess tunable mechanical properties, and therefore promising for use in the field of 3D‐printed biomaterials. This review aims to spotlight the recent progress on the application of different lignocellulosic materials (cellulose, hemicellulose, and lignin) from various sources (wood, bacteria, and fungi) in different forms (including nanocrystals and nanofibers in 3D bioprinting). Their crystallinity, leading to water insolubility and the presence of suspended nanostructures, makes these polymers stand out among hydrogel‐forming biomaterials. These unique structures give rise to favorable properties such as high ink viscosity and strength and toughness of the final hydrogel, even when used at low concentrations. In this review, the application of lignocellulosic polymers with other components in inks is reported for 3D bioprinting and identified supercritical CO2 as a potential sterilization method for 3D‐printed cellulosic materials. This review also focuses on the areas of potential development by highlighting the opportunities and unmet challenges such as the need for standardization of the production, biocompatibility, and biodegradability of the cellulosic materials that underscore the direction of future research into the 3D biofabrication of cellulose‐based biomaterials.

In the present study, modified activated carbon (AC) was used in a fixed-bed column for CO 2 adsorption of gaseous mixtures. The adsorbents were prepared by impregnation two metals Cu and Zn on the surface of the acid modified AC using a two-stage modification. At the first stage, the samples of AC were pretreated by oxidizing agent (nitric acid) to increase the amount of oxygen surface groups and at the second stage, the acid modified AC were impregnated by two metal salts Cu and Zn on the surface to produce a superior CO 2 adsorbent. Metal-loaded acid modified AC was prepared by using different ratios of Cu/Zn ranging from 4 to 20%. The CO 2 adsorbed have been measured over the temperature range of (30-50 °C), pressure (100-200 kPa) and CO 2 concentrations from 5 to 50%. An increase of 49% CO 2 adsorbed was resulted by using modified activated carbon. The breakthrough curves indicated that the breakthrough time increased with increasing the operating pressure, and decreased with increasing the temperature from 30 to 50 °C and CO 2 concentration from 5 to 50%. The deactivation model was successfully applied to analyze the breakthrough curves under various operating conditions

During the past few years the scientific and medical community has been confronted with a continual interest in vitamin E with the interest prompted by new discoveries. Tocopherols and tocotrienols, commonly known as vitamin E, are extremely invaluable compounds and have various nutritional functionalities and benefits to human health. Great deals of research projects have been launched in order to develop effective methods for the extraction of vitamin E. By and large, three distinct extractive methods are usually employed: supercritical fluid extraction (SFE), molecular distillation, and adsorption methods. These methods are sensitive to different experimental conditions, such as pressure, temperature, and flow rate with noticeable effects on the efficiency of the extraction and enrichment of vitamin E. This review has covered the most commonly adapted extraction methods and has probed into the extraction yields under variable operational parameters.

No abstract