Singlet fission can split a high energy singlet exciton and generate two lower energy triplet excito ns. This process has shown near 200 percent triplet exciton yield. Sensitizing solar cells with singlet fission material, it can potentially increase the power conversion efficiency limit from 29 percent to 35 percent. Singlet fission in the tetracene is known to be efficient, and the energy of the triplet excitons are energetically matched to the silicon bandgap. In this work, we designed an optical measurement with an external magnetic field to determine the efficiencies of triplet exciton transfer from tetracene to silicon. Using this method, we have found that a passivation layer of 8 angstroms of hafnium oxynitride on silicon allows efficient triplet exciton transfer around 133 percent.

Solution-processable electronic devices are highly desirable due to their low cost and compatibility with flexible substrates. However, they are often challenging to fabricate due to the hydrophobic nature of the surfaces of the constituent layers. Here, we use a protein solution to modify the surface properties and to improve the wettability of the fluoropolymer dielectric Cytop. The engineered hydrophilic surface is successfully incorporated in bottom-gate solution-deposited organic field-effect transistors (OFETs) and hybrid organic-inorganic trihalide perovskite field-effect transistors (HTP-FETs) fabricated on flexible substrates. Our analysis of the density of trapping states at the semiconductor-dielectric interface suggests that the increase in the trap density as a result of the chemical treatment is minimal. As a result, the devices exhibit good charge carrier mobilities, near-zero threshold voltages, and low electrical hysteresis.

Abstract2D polymers (2DPs) are promising as structurally well‐defined, permanently porous, organic semiconductors. However, 2DPs are nearly always isolated as closed shell organic species with limited charge carriers, which leads to low bulk conductivities. Here, the bulk conductivity of two naphthalene diimide (NDI)‐containing 2DP semiconductors is enhanced by controllably n‐doping the NDI units using cobaltocene (CoCp2). Optical and transient microwave spectroscopy reveal that both as‐prepared NDI‐containing 2DPs are semiconducting with sub‐2 eV optical bandgaps and photoexcited charge‐carrier lifetimes of tens of nanoseconds. Following reduction with CoCp2, both 2DPs largely retain their periodic structures and exhibit optical and electron‐spin resonance spectroscopic features consistent with the presence of NDI‐radical anions. While the native NDI‐based 2DPs are electronically insulating, maximum bulk conductivities of >10−4 S cm−1 are achieved by substoichiometric levels of n‐doping. Density functional theory calculations show that the strongest electronic couplings in these 2DPs exist in the out‐of‐plane (π‐stacking) crystallographic directions, which indicates that cross‐plane electronic transport through NDI stacks is primarily responsible for the observed electronic conductivity. Taken together, the controlled molecular doping is a useful approach to access structurally well‐defined, paramagnetic, 2DP n‐type semiconductors with measurable bulk electronic conductivities of interest for electronic or spintronic devices.

Transparent photovoltaic cells are an emerging technology that can provide point-of-use electricity generation for building-integrated applications. While most transparent solar cells to date target absorption of the photon-rich near-infrared portion of the solar spectrum, these devices compromise color neutrality and transparency because of parasitic absorption of long-wavelength visible light. One solution to eliminate parasitic absorption is to employ materials that absorb near-ultraviolet light with sharper absorption cutoffs. Herein, we demonstrate organic donor materials based on N,N′-diaryl-diamines that incorporate a series of aryl linkers to systematically tune their absorption profiles. When paired with acceptor 4,6-bis­(3,5-di-4-pyridinylphenyl)-2-methylpyrimidine in an inverted architecture with an indium tin oxide top electrode and an organic optical outcoupling layer, the three best-performing transparent solar cells exhibit average photopic-response-weighted transmittances of 80.3–82.0% and color-rendering indices of 95.0–97.1, both of which are records for organic photovoltaics, with power-conversion efficiencies of 0.43–0.70%.