No abstract

Interaction between the water adsorption ability of aluminium-oxide-based sorbents and their chemical composition, acid-base properties of the surface, and textural characteristics has been analysed. Alumina desiccants were synthesized with the centrifugal–thermal activation of gibbsite followed by the hydration of the gibbsite under mild conditions. It was demonstrated that the multicyclic adsorption regeneration of samples under realistic conditions results in structural transformations and changes in the acidity of their surfaces and water adsorption ability. The modification of pseudoboehmite with alkali ions increases surface basicity and the dynamic capacity of adsorbents relating to water vapours. Equations have been presented that describe the adsorption and desorption processes taking place during water vapour adsorption with the materials studied.

Using scanning and transmission electron microscopy, we studied silicon particles formed during the solidification of Al-7%Si alloy when different modifying mixtures were introduced into the melt: (1) a mixture of ultrafine powders Na 3 AlF 6 + K 2 ZrF 6 + TiO 2 + ZrO 2 ; (2) K 2 ZrF 6 ; and (3) the flux Arsal. By differential scanning calorimetry, it was established that modifying mixtures significantly influenced the temperature of the solidification processes. The formation of two types of Si crystals was established. The first type of Si crystals precipitated during the solidification of the eutectic mixture (α-Al + Si) in the form of needles or plates. The second type of Si crystals was segregated from eutectic Al-phases or segregated from the solid phase α-Al upon cooling in the solid state. The introduction of modifiers led to a shift in solidification temperatures. When fluoride salts were used, there was an increase in the temperature of eutectic solidification. Silicon crystals were large (up to 10 µm), with a local excess of aluminum concentration.

Relevance of the work is due to the need for new materials that are used in medicine as a substitute for natural bone tissue injuries, fractures, etc. The aim of the work is to obtain composites with improved biocompatible properties based on poly-L-lactide (PLA) and hydroxyapatite (HA) and to perform pilot analysis of interaction PLA, HA, composite PLA-HA with primary human monocytes-derived macrophages in vitro. The pilot experiments using human primary monocytes cultivated on the surface of the samples demonstrated that PLA-HA can stimulate release of anti-inflammatory cytokines that indicates the presence of potential anti-inflammatory properties of the composites

No abstract