No abstract

No abstract

The 5G wireless revolution presents some dramatic challenges to the design of handsets and communication infrastructures, as 5G targets higher than 10 Gbps download speed using millimeter-wave (mm-Wave) spectrum with multiple-input multiple-output (MIMO) antennas, connecting densely deployed wireless devices for Internet-of-Everything (IoE), and very small latency time for ultrareliable machine type communication, etc. The broadband modulation bandwidth for 5G RF transmitters (i.e., maximum possibly even above 1 GHz) demands high-power efficiency and stringent linearity from its power amplifier (PA). Additionally, the phased-array MIMO antennas with numerous RF front-ends (RFFEs) will require unprecedented high integration level with low cost, making the design of 5G PA one of the most challenging tasks. As the centimeter-wave (cm-Wave) 5G systems will probably be deployed on the market earlier than their mm-Wave counterparts, we will review in this paper the latest development on 15 GHz and 28 GHz 5G cm-Wave PAs extensively, while also covering some key mm-Wave PAs in the literature. Our review will focus on the available options of device technologies, novel circuit and system architectures, and efficiency enhancement techniques at power back-off for 5G PA design.

It has been the dream of many scientists and engineers to realize a non-contact remote sensing system that can perform continuous, accurate and long-term monitoring of human vital signs as we have seen in many Sci-Fi movies. Having an intelligible sensor system that can measure and record key vital signs (such as heart rates and respiration rates) remotely and continuously without touching the patients, for example, can be an invaluable tool for physicians who need to make rapid life-and-death decisions. Such a sensor system can also effectively help physicians and patients making better informed decisions when patients’ long-term vital signs data is available. Therefore, there has been a lot of research activities on developing a non-contact sensor system that can monitor a patient’s vital signs and quickly transmit the information to healthcare professionals. Doppler-based radio-frequency (RF) non-contact vital signs (NCVS) monitoring system are particularly attractive for long term vital signs monitoring because there are no wires, electrodes, wearable devices, nor any contact-based sensors involved so the subjects may not be even aware of the ubiquitous monitoring. In this paper, we will provide a brief review on some latest development on NCVS sensors and compare them against a few novel and intelligent phased-array Doppler-based RF NCVS biosensors we have built in our labs. Some of our NCVS sensor tests were performed within a clutter-free anechoic chamber to mitigate the environmental clutters, while most tests were conducted within the typical Herman-Miller type office cubicle setting to mimic a more practical monitoring environment. Additionally, we will show the measurement data to demonstrate the feasibility of long-term NCVS monitoring. The measured data strongly suggests that our latest phased array NCVS system should be able to perform long-term vital signs monitoring intelligently and robustly, especially for situations where the subject is sleeping without hectic movements nearby.

No abstract