As, Hg, and Se are the most volatile elements in the flue gas from a coal-fired power plant. Significant amounts of these elements cause an undesired direct gaseous emission, which leads to a serious environmental health risk. The main focus of this study is to evaluate the possibility of simultaneous sampling of these volatile elements using an accurate official method for Hg (the most volatile element). A study of As, Hg, and Se emissions from a 1400 MW coal-fired power plant equipped with electrostatic precipitators (ESPs) was carried out for the combustion of a mixture of two types of coal. Simultaneous sampling of coal, bottom ash, fly ash, flue gas, and particles associated with the gas phase has been performed. Flue gas has been sampled by the Ontario Hydro Method Sampling Train, an ASTM method for Hg speciation. This sampling method was tested for As and Se sampling. As and Se determinations have been performed by HG-AAS, and Hg has been determined by CV-AAS. The results were used to examine the following: overall mass balances, relative distribution of these elements in the coal-fired power plant; As, Hg, and Se concentrations in coal and combustion residues; and predominant oxidation state for Hg in flue gas. The mass balances obtained for As, Hg, and Se were satisfactory in all cases; nevertheless, relative enrichment values in fly ash for As and Se were low; therefore, we concluded that As sampling in flue gas can be conducted by application of the Ontario Hydro Method; nevertheless Se released in the gas phase is not completely collected by this sampling train. Application of this sampling method allowed for performance of Hg speciation. The results indicated that Hg(II) was the predominant species in flue gas. It has also been proved that 24%, more than 99.8%, and 90% for As, Hg, and Se in the stack emissions, respectively, were in the gaseous phase.
Fifteen metallic species, silver (Ag), aluminum (Al), calcium (Ca), cadmium (Cd), chromium (Cr), copper (Cu), iron (Fe), potassium (K), magnesium (Mg), manganese (Mn), sodium (Na), nickel (Ni), lead (Pb), strontium (Sr) and zinc (Zn), were determined in 46 cocaine samples confiscated by the Spanish police in Galicia (northwest Spain). Classification of these cocaine samples according to their geographic origin (Colombia and Venezuela) was achieved by the application of pattern recognition techniques to the metallic content data. Cocaine samples, around 0.5 g, were directly dissolved in 2 mL of 35.0%(v/v) HNO3, diluted to 10 mL with ultrapure water. The metals were quantified by means of electrothermal atomic absorption spectrometry (Ag, Al, Cd, Cr, Cu, Mn, Ni, Pb and Sr), flame atomic absorption spectrometry (Ca, Fe, Mg and Zn), and flame atomic emission spectrometry (K and Na). Results show that two geographic origins can be established through the presence of trace and major elements.
The feasibility of pressurized solvents (liquids at a high pressure and/or high temperature without the subcritical point being reached) has been newly investigated to accelerate enzymatic hydrolysis processes of mussel tissue for multielement determinations. The target elements (Al, As, Cd, Co, Cu, Fe, Hg, Li, Mn, Pb, Se, Sr, V, and Zn) were released from dried mussel tissue by action of two proteases (pepsin and pancreatin), and they have been evaluated by inductively coupled plasma optical emission spectrometry (ICP-OES). Variables inherent to the enzymatic activity (pH, ionic strength, temperature, and enzyme mass) and factors affecting pressurization (static time, pressure, and number of cycles) were simultaneously studied by applying a Plackett-Burman design (PBD) as the screening method. Results showed that pH, ionic strength, and temperature were the most statistically significant factors (confidence interval of 95%) under pressurized conditions for pepsin, while pH and ionic strength affected pancreatin activity. This means that metal extraction is mostly attributed to enzymatic activity. The static time (enzymatic hydrolysis time) was found statistically nonsignificant for most of the elements, meaning that the hydrolysis procedure can be finished within a 2-15 min range. For pepsin, optimized conditions (pH 1.0, temperature 40 degrees C, pressure 1500 psi, static time 2 min, and number of cycles 3) gave quantitative extractions for As, Cd, Co, Cu, Hg, Li, Mn, Pb, Se, Sr, V, and Zn. The pepsin mass was 0.05 g, and the solution was Milli-Q water at pH 1.0 (adjusted with hydrochloric acid). For pancreatin, quantitative recoveries were only reached for As, Cd, Cu, Li, Pb, and Sr at room temperature, at a pressure of 1500 psi, for a static time of 2 min and a number of cycles of 3. The extraction solution was a 0.3 M potassium dihydrogen phosphate/potassium hydrogen phosphate buffer at a pH of 7.5 working at room temperature. Around 0.5 g of diatomaceous earth was used as dispersing agent for hydrolyses with either enzyme. Analytical performances, such as limits of detection and quantification and repeatability of the overall procedure, have been established. Finally, accuracy of the methods was assessed by analyzing seafood certified reference materials (GBW-08571, DORM-2, DOLT-3, TORT-2), fatty tissues certified reference materials (BCR 185, NIST 1577b), and fibrous certified reference materials (BCR 62, GBW-08501).
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.
customersupport@researchsolutions.com
10624 S. Eastern Ave., Ste. A-614
Henderson, NV 89052, USA
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.
Copyright © 2024 scite LLC. All rights reserved.
Made with 💙 for researchers
Part of the Research Solutions Family.