This paper presents a design methodology for the implementation of a miniaturized square patch antenna and its circuit model for 5.15 GHz ISM band. The miniaturization is achieved by employing concentric complementary split ring resonator (CSRR) structures in between the patch and ground plane. The results are compared with the traditional square patch antenna in terms of area, bandwidth, and efficiency. The area is reduced with a ratio of 1/4 with respect to the traditional patch. The miniaturized square patch antenna has an efficiency, bandwidth, and reflection coefficient of 78%, 0.4%, and −16 dB, respectively. The measurement and circuit modeling results show a good agreement with the full-wave electromagnetic simulations.

In this paper, a triple-band 1 × 2 and 1 × 4 microstrip patch antenna array for next-generation wireless and satellite-based applications are presented. The targeted frequency bands are 3.6, 5.2 and 6.7 GHz, respectively. Simple design procedures and optimization techniques are discussed to achieve better antenna performance. The antenna is designed and simulated using Agilent ADS Momentum using FR4 substrate (r = 4.2 and h = 1.66 mm). The main patch of the antenna is designed for 3.6 GHz operation. A hybrid feed technique is used for antenna arrays with quarter-wave transformer-based network to match the impedance from the feed-point to the antenna to 50. The antenna is optimized to resonate at triple-bands by using two symmetrical slits. The single-element triple-band antenna is fabricated and characterized, and a comparison between the simulated and measured antenna is presented. The achieved simulated impedance bandwidths/gains for the 1 × 2 array are 1.67%/7.75, 1.06%/7.7, and 1.65%/9.4 dBi and for 1 × 4 array are 1.67%/10.2, 1.45%/8.2, and 1.05%/10 dBi for 3.6, 5.2, and 6.7 GHz bands, respectively, which are very practical. These antenna arrays can also be used for advanced antenna beam-steering systems. Copyright © Cambridge University Press and the European Microwave Association 2014

This paper presents in-body to on-body and inbody to in-body channel models of a planar wideband elliptical ring implanted antenna in the lower part of Ultra-WideBand (UWB, 3.1 to 5.1 GHz). The results are verified inside a practical UWB liquid phantom with the help of a wideband on-body monopole antenna. Moreover, the design principle of the inbody and on-body antennas, as well as their simulated and measured reflection coefficients are presented. The channel characterization inside the lossy medium gives a deep insight of wireless capsule endoscope technology (WCE) and helps to evaluate the radiation performance of the previously designed planar elliptical ring implanted antenna.

Highly resistive (HR) silicon (Si) can behave as a switch when illuminated by optical source of suitable wavelength. Different reconfigurable passive structures, such as filters, waveguides, and antennas, can be constructed using such silicon switches. This letter presents experimental characterization of high and low resistive (HR & LR) silicon for switching application. In the experiment, HR Si is modeled on a switched transmission line by halogen lamp and a laser source. The experiment of utilizing halogen lamp for Si switch characterization is cost‐effective and can assist engineers in designing reconfigurable antennas. In future, this experiment could be utilized in designing novel reconfigurable antennas.

No abstract