The electrical and chemical properties of the titanium dioxide (TiO2) coated spirals grown by the atomic layer deposition (ALD) technique in two different temperatures of 150 °C and 300 °C are studied. The thickness of the TiO2 layers studied are 20, 40, and 80 nm. A switched capacitor amplifier is used to investigate the pH response and the capacitance of the samples. It is found that the performance of the TiO2 samples depends on either the thickness or the deposition temperature due to the differences in the physical properties of the oxide layer such as surface roughness and film density. The high temperature samples are more crystalline, whereas the low temperature samples are more amorphous. Since there is a low pass filter effect in the electrolyte–sample interface, the TiO2 coated samples show the better response to the pH change for the high temperature samples as the sensor surface area for binding the hydrogen ions is larger and the charge transfer resistance is smaller. Furthermore, more roughness on the surface can be obtained by increasing the thickness, which reduces the charge transfer resistance. In this study, the 80 nm sample deposited at 300 °C gives the best pH response of 40 mV/pH.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.