The Radar Imager for Mars’ Subsurface Experiment (RIMFAX) is a Ground Penetrating Radar on the Mars 2020 mission’s Perseverance rover, which is planned to land near a deltaic landform in Jezero crater. RIMFAX will add a new dimension to rover investigations of Mars by providing the capability to image the shallow subsurface beneath the rover. The principal goals of the RIMFAX investigation are to image subsurface structure, and to provide information regarding subsurface composition. Data provided by RIMFAX will aid Perseverance’s mission to explore the ancient habitability of its field area and to select a set of promising geologic samples for analysis, caching, and eventual return to Earth. RIMFAX is a Frequency Modulated Continuous Wave (FMCW) radar, which transmits a signal swept through a range of frequencies, rather than a single wide-band pulse. The operating frequency range of 150–1200 MHz covers the typical frequencies of GPR used in geology. In general, the full bandwidth (with effective center frequency of 675 MHz) will be used for shallow imaging down to several meters, and a reduced bandwidth of the lower frequencies (center frequency 375 MHz) will be used for imaging deeper structures. The majority of data will be collected at regular distance intervals whenever the rover is driving, in each of the deep, shallow, and surface modes. Stationary measurements with extended integration times will improve depth range and SNR at select locations. The RIMFAX instrument consists of an electronic unit housed inside the rover body and an antenna mounted externally at the rear of the rover. Several instrument prototypes have been field tested in different geological settings, including glaciers, permafrost sediments, bioherme mound structures in limestone, and sedimentary features in sand dunes. Numerical modelling has provided a first assessment of RIMFAX’s imaging potential using parameters simulated for the Jezero crater landing site.

No abstract

No abstract

No abstract

Two Norwegian AIS-satellites, NorSat-1 and NorSat-2, were launched in July 2017. Both are equipped with the ASR x50, the latest space-AIS receiver developed by Kongsberg Seatex AS, offering advanced signal processing and continuous operation on all four AIS channels. The NorSat-satellites collect ~ 1.5 million messages from ~ 50,000 ships per day (24 h) each, which is a factor ~ 2.8 increase in the number of messages compared to the ASR 100 on-board AISSat-1 and AISSat-2. The improvements of the AIS-satellites can be attributed to three developments: the performance of the receiver, the use of antenna diversity, and the use of frequency channel diversity. Daily statistics for February 2018 over the Mediterranean Sea illustrate the improvements: The median value of the number of messages received with NorSat-1 using only one antenna is 2.3 times higher than for AISSat-1. When both NorSat-1 antennas are used, the improvement factor becomes 4.1, and finally, when two additional receiver channels are used to collect long-range AIS messages, the total improvement becomes 8.2 times. In terms of ships detected, the factors are 1.8, 2.7, and 4.4 for the respective steps. Long-range AIS messages amount to just 5% of the total AIS messages received by NorSat-1 in August 2017, but it allows to detect 20% more ships on a global scale, and as much as 10 times more ships in a the high-traffic area in the North Sea.