No abstract

No abstract

Synthetic Aperture Radar (SAR) is a potential application of remote sensing to geological and hydrometeorological hazards. This paper presents sustainability strategies for smart cities: the use of SAR Sentinel-1 for monitoring flood inundation and landslide hazards in Aceh Province, Indonesia. In this study, for flood detection, we attempt to uses Sentinel-1A (S-1A) in the same direction and acquisition through polarization of Vertical transmit and Vertical received (VV) – Vertical transmit and Horizontal received (VH) with a temporal baseline of 6 days. Those data were then analysed using the SNAP Toolbox. The results showed that the S-1A was successfully for detecting a flood inundation in which VH polarization is more sensitive than VV. For landslide monitoring, we apply multitemporal SAR images, where one of them is the Quasi-Persistent Scatterers (Q-PS) technique. Using ascending and descending orbit pass results in a better velocity map where both sides of the slope are detected due to the different sensor angle of both orbital passes. This technique has resulted in the undulating areas being monitored well and this will also fill the gap of layover and shadowing phenomena of the slant range SAR image. The Q-PS combinations were very effective to identify the deformation features associated with the land movement. For a smart city, natural hazards such as landslides and floods require continuous monitoring to ensure the potential as well as management and mitigation of natural hazards. Therefore, the InSAR technique is one of the effective ways for doing this strategy.

The wave energy power generation-pendulum system (WEPG-PS) is a four-wheeled instrument designed to convert wave power into electric energy. The first wheel is connected to the pendulum by a double freewheel, the second and third are ordinary wheels, while the fourth is a converter component that is axially connected to the electric generator. This design used the Euler-Lagrange formalism and Runge-Kutta method to examine an ideal dimension and determine the numerical solution of the equation of motion related to the rotation speed of the wheels. The result showed that the WEPG-PS' converter system rotated properly when its mass, length, and moment of inertia are 10 kg, 2.0 m, and 0.25 kgm2, respectively. This is in addition to when the radius of the first, second, third, and fourth wheels are 0.5, 0.4, 0.2, and 0.01 m, with inertia values of 0.005, 0.004, 0.003, and 0.1 kgm2. The converter system has the ability to rotate the fourth wheel, which acts as the handle of an electric generator at an angular frequency of approximately 500 - 600 rad/s. The converter system is optimally rotated when driven by a minimum force of 5 N and maximum friction of 0.05. Therefore, the system is used to generate electricity at an amplitude of 0.3 - 0.61 m, 220 V with 50 Hz. Besides, the lower rotation speed and frequency of the energy converter of the WEPG-PS (300 rad/s) and induction generator (50 Hz) were able to generate electric power of 7.5 kW. ©2020. CBIORE-IJRED. All rights reserved

In a modern survey, information on the real condition of the study area is required to support the analysis and interpretation result of a study. However, obtaining information on the real condition in a wide covered area is difficult, particular in an area that hard to access and has varied topographic. The method that can imaging the real condition of a study area is observation using UAV/drone using structure from motion technique. Besides can be observed with a wide area, the detailed condition of the area also can be visualized. Structure from motion (sfm) is the technique that determines the spatial and geometric relationship of the target area through the movement of the camera. In this research, the sfm technique was applied to create the 3 dimension construction of the Kelok Sembilan flyover. The result show, 3D construction has a high spatial resolution in 2.99 cm/pixel measured in Ground Sampling Distance (GSD). Meanwhile, the horizontal relative resolution is 5.97 cm, and the vertical relative resolution is 8.95 cm.