Providing artificial light and enhancing the quality of the respective light sources is of continued interest in the fields of solid state, condensed matter, and semiconductor physics. Much research has been carried out to increase the luminous efficiency, lifetime and colour stability of such devices. However, the emission characteristics of a given light source do not necessarily comply with today’s often sophisticated applications. Here, beam shaping addresses the transformation of a given light distribution into a customized form. This is typically achieved by secondary optical elements often sporting elaborate designs, where the actual light source takes up only a small fraction of the system’s volume. Such designs limit the final light source to a single permanent operation mode, which can only be overcome by employing mechanically adjustable optical elements. Here we show that organic light-emitting diodes (OLEDs) can enable real-time regulation of a beam shape without relying on secondary optical elements and without using any mechanical adjustment. For a red light-emitting two-unit OLED architecture, we demonstrate the ability to continuously tune between strongly forward and strongly sideward emission, where the device efficiency is maintained at an application-relevant level ranging between 6 and 8% of external quantum efficiency for any chosen setting. In combination with additional optical elements, customizable and tuneable systems are possible, whereby the tuning stems from the light source itself rather than from the use of secondary optics.

Improving the efficiency of organic light-emitting diodes (OLEDs) by enhancing light outcoupling is common practise and remains relevant as not all optical losses can be avoided. Especially, externally attached scattering layers combine several advantages. They can significantly increase the performance and neither compromise the electric operation nor add high costs during fabrication. Efficiency evaluations of external scattering layers are often done with lab scale OLEDs. In this work we therefore study different characterization techniques of red, green and blue lab scale OLEDs with attached light scattering foils comprising TiO2 particles. Although we observe an increased external quantum efficiency (EQE) with scattering foils, our analysis indicates that areas outside the active area have a significant contribution. This demonstrates that caution is required when efficiency conclusions are transferred to large area applications, for which effects that scale with the edges become less significant. We propose to investigate brightness profiles additionally to a standard EQE characterizations as latter only work if the lateral scattering length is much smaller than the width of the active area of the OLED. Our results are important to achieve more reliable predictions as well as a higher degree of comparability between different research groups in future.

Lab-on-a-Chip (LoC) devices combining microfluidic analyte provision with integrated optical analysis are highly desirable for several applications in biological or medical sciences. While the microfluidic approach is already broadly addressed, some work needs to be done regarding the integrated optics, especially provision of highly integrable laser sources. Polymer optical fiber (POF) lasers represent an alignment-free, rugged, and flexible technology platform. Additionally, POFs are intrinsically compatible to polymer microfluidic devices. Home-made Rhodamine B (RB)-doped POFs were characterized with experimental and numerical parameter studies on their lasing potential. High output energies of 1.65 mJ, high slope efficiencies of 56 % , and 50 % -lifetimes of ≥900 k shots were extracted from RB:POFs. Furthermore, RB:POFs show broad spectral tunability over several tens of nanometers. A route to optimize polymer fiber lasers is revealed, providing functionality for a broad range of LoC devices. Spectral tunability, high efficiencies, and output energies enable a broad field of LoC applications.

No abstract

The fabrication of micron-sized poly(methyl methacrylate) (PMMA) polymer optical fibers doped with rhodamine B as an organic dye is demonstrated.Highly aligned and defect-free fibers are fabricated by using the stable jet electrospinning (SJES) method and systematically varying critical parameters such as solvent type and polymer concentration. At optimal conditions, for example, a polymer concentration of 35 wt% of PMMA in butanone, ribbonshaped fibers with a smooth surface and diameter of about 20 μm could be spun using SJES mode and deposited on a rotating drum as target in a highly aligned manner. Photoluminescence spectra of the doped fibers excited longitudinally and transversely with a laser show an excitation peak with fullwidth-at-half-maximum of only 5.05 nm and a low lasing threshold at a pump energy of 0.55 μJ, indicating that SJES could become a new source of amplified optics components or organic solid-state fiber lasers.