High-performance long-range NoC link enables efficient implementation of network-on-chip topologies which inherently require high-performance long-distance point-to-point communication such as torus and fat-tree structures. In addition, the performance of other topologies, such as mesh, can be improved by using high-performance link between few selected remote nodes. We presented novel implementation of high-performance long-range NoC link based on multilevel current-mode signaling and delay-insensitive two-phase 1-of-4 encoding. Current-mode signaling reduces the communication latency of long wires significantly compared to voltage-mode signaling, making it possible to achieve high throughput without pipelining and/or using repeaters. The performance of the proposed multilevel current-mode interconnect is analyzed and compared with two reference voltage mode interconnects. These two reference interconnects are designed using two-phase 1-of-4 encoded voltage-mode signaling, one with pipeline stages and the other using optimal repeater insertion. The proposed multilevel current-mode interconnect achieves higher throughput and lower latency than the two reference interconnects. Its throughput at 8 mm wire length is 1.222 GWord/s which is 1.58 and 1.89 times higher than the pipelined and optimal repeater insertion interconnects, respectively. Furthermore, its power consumption is less than the optimal repeater insertion voltage-mode interconnect, at 10 mm wire length its power consumption is 0.75 mW while the reference repeater insertion interconnect is 1.066 mW. The effect of crosstalk is analyzed using four-bit parallel data transfer with the best-case and worst-case switching patterns and a transmission line model which has both capacitive coupling and inductive coupling.

No abstract

No abstract

No abstract