A variety of potentially inhibitory degradation products are produced during pretreatment of lignocellulosic biomass. Qualitative and quantitative interrogation of pretreatment hydrolysates is paramount to identifying potential correlations between pretreatment chemistries and microbial inhibition in downstream bioconversion processes. In the present study, corn stover, poplar, and pine feedstocks were pretreated under eight different chemical conditions, which are representative of leading pretreatment processes. Pretreatment processes included: 0.7% H(2)SO(4), 0.07% H(2)SO(4), liquid hot water, neutral buffer solution, aqueous ammonia, lime, lime with oxygen pressurization, and wet oxidation. Forty lignocellulosic degradation products resulting from pretreatment were analyzed using high performance liquid chromatography in combination with UV spectroscopy or tandem mass spectrometry detection (HPLC-PDA-MS/MS) and ion chromatography (IC). Of these compounds, several have been reported to be inhibitory, including furfural, hydroxymethyl furfural, ferulic acid, 3,4-dihydroxybenzaldehyde, syringic acid among others. Formation and accumulation of monitored compounds in hydrolysates is demonstrated to be a function of both the feedstock and pretreatment conditions utilized.

Corn stover is one of the leading feedstock candidates for commodity-scale biomass-to-ethanol processing. The composition of water-soluble materials in corn stover has been determined with greater than 90% mass closure in four of five representative samples. The mass percentage of water-soluble materials in tested stover samples varied from 14 to 27% on a dry weight basis. Over 30 previously unknown constituents of aqueous extracts were identified and quantified using a variety of chromatographic techniques. Monomeric sugars (primarily glucose and fructose) were found to be the predominant water-soluble components of corn stover, accounting for 30-46% of the dry weight of extractives (4-12% of the dry weight of feedstocks). Additional constituents contributing to the mass balance for extractives included various alditols (3-7%), aliphatic acids (7-21%), inorganic ions (10-18%), oligomeric sugars (4-12%), and a distribution of oligomers tentatively identified as being derived from phenolic glycosides (10-18%).

No abstract

Any valuation of a potential feedstock for bioprocessing is inherently dependent upon detailed knowledge of its chemical composition. Accepted analytical procedures for compositional analysis of biomass water-soluble extracts currently enable near-quantitative mass closure on a dry weight basis. Techniques developed in conjunction with a previous analytical assessment of corn stover have been applied to assess the composition of water-soluble materials in four representative switchgrass samples. To date, analytical characterization of water-soluble material in switchgrass has resulted in >78% mass closures for all four switchgrass samples, three of which have a mass closure of >85%. Over 30 previously unknown constituents in aqueous extracts of switchgrass were identified and quantified using a variety of chromatographic techniques. Carbohydrates (primarily sucrose, glucose, and fructose) were found to be the predominant water-soluble components of switchgrass, accounting for 18-27% of the dry weight of extractives. Total glycans (monomeric and oligomeric sugars) contributed 25-32% to the dry weight of extractives. Additional constituents contributing to the mass balance for extractives included various alditols (2-3%), organic acids (10-13%), inorganic ions (11-13%), and a distribution of oligomers presumed to represent a diverse mixture of lignin-carbohydrate complexes (30-35%). Switchgrass results are compared with previous analyses of corn stover extracts and presented in the context of their potential impact on biomass processing, feedstock storage, and future analyses of feedstock composition.