Bioactive ferroelectric composites based on polyvinylidene fluoride, hydroxyapatite and βtricalcium phosphate have been synthesized and their structural, microstructural, bioactive, and ferroelectric properties are characterized. Structural and FTIR investigations showed the presence of the polar polyvinylidene fluoride (β 2) phase, while ferroelectric characterizations revealed remnant polarizations and coercive field, around 0.04C/cm 2 and 28 kV/cm, respectively, for these biocompatible samples. Structural and microstructural analysis of samples previously immersed in simulated body fluid for 7 days revealed a large apatite phase growth (1.45 m) on the composites' surfaces as a strong indication of their elevated bioactivity and potentialities for bone tissue engineering.

No abstract

In this work, we investigate the bioactivity and structural properties of nanostructured bulk composites that are composed of Nb2O5 and natural hydroxyapatite (HAp) and are produced by mechanical alloying and powder metallurgy. X-ray diffraction and Raman spectroscopy data showed that the milling process followed by a heat treatment at 1000 °C induced chemical reactions along with the formation of the CaNb2O6, PNb9O25 and Ca3(PO4)2 phases. Rietveld refinement indicated significant changes in each phase weight fraction as a function of HAp concentration. These changes influenced the in vitro bioactivity of the material. XRD and FTIR analyses indicated that the composites exhibited bioactivity characteristics by forming a carbonated apatite layer when the composites were immersed in a simulated body fluid. The formed layers had a maximum thickness of 13 μm, as measured by confocal Raman spectroscopy and as confirmed by scanning electron microscopy. The results of this work suggest that the tested bulk composites are promising biomaterials for use in implants.

A ceramic/polymer biocomposite with high potential for multifunctional practical applications in bone tissue engineering was synthesized by using a well-known piezoelectric polymer, polyvinylidene fluoride (PVDF), and a high bioactive biphasic calcium phosphate (BCP) ceramic obtained from recycled fish bones. High-bioactivity was observed for the PVDF-BCP composite when it was subjected to conditions that simulate the animal body once a very thick apatite layer (9 μm) was grown on its surface in an immersion experiment (7 days) in simulated body fluid. The structural characteristics of the PVDF-BCP composite showed similarities with highly bioactive young animal bones, overlapped with PVDF polymorphic phases. Mechanical tests revealed properties very similar to those of the human bone tissue with a resistance strength reaching 80 MPa. Together, all these factors indicated a very promising material for application in osseous implants/replacement with postoperative recovery controlled/ accelerated by external stimuli.

Biomaterials that effectively act in biological systems, as in treatment and healing of damaged or lost tissues, must be able to mimic the properties of the body’s natural tissues in its various aspects (chemical, physical, mechanical and surface). These characteristics influence cell adhesion and proliferation and are crucial for the success of the treatment for which a biomaterial will be required. In this context, the electrospinning process has gained prominence in obtaining fibers of micro- and nanometric sizes from polymeric solutions aiming to produce scaffolds for tissue engineering. In this manuscript, poly(vinylidene fluoride) (PVDF) was used as a polymeric matrix for the manufacture of piezoelectric scaffolds, exploring the formation of the β-PVDF piezoelectric phase. Micro- and nanometric hydroxyapatite (HA) particles were incorporated as a dispersed phase in this matrix, aiming to produce multifunctional composite membranes also with bioactive properties. The results show that it is possible to produce membranes containing micro- and nanofibers of the composite by the electrospinning process. The HA particles show good dispersion in the polymer matrix and predominance of β-PVDF phase. Also, the composite showed apatite growth on its surface after 21 days of immersion in simulated body fluid (SBF). Tests performed on human fibroblasts culture revealed that the electrospun membranes have low cytotoxicity attesting that the composite shows great potential to be used in biomedical applications as bone substitutions and wound healing.