Abstract. This paper examines the accuracy and performance of the RAPID (Real-time Analysis for Particle transport and In-situ Detection) code system for the simulation of a used nuclear fuel (UNF) cask. RAPID is capable of determining eigenvalue, subcritical multiplication, and pin-wise, axially-dependent fission density throughout a UNF cask. We study the source convergence based on the analysis of the different parameters used in an eigenvalue calculation in the MCNP Monte Carlo code. For this study, we consider a single assembly surrounded by absorbing plates with reflective boundary conditions. Based on the best combination of eigenvalue parameters, a reference MCNP solution for the single assembly is obtained. RAPID results are in excellent agreement with the reference MCNP solutions, while requiring significantly less computation time (i.e., minutes vs. days). A similar set of eigenvalue parameters is used to obtain a reference MCNP solution for the whole UNF cask. Because of time limitation, the MCNP results near the cask boundaries have significant uncertainties. Except for these, the RAPID results are in excellent agreement with the MCNP predictions, and its computation time is significantly lower, 35 second on 1 core versus 9.5 days on 16 cores.

The non-linear energy response of the plastic scintillator EJ-260 is measured with the MicroCHANDLER detector, using neutron beams of energy 5 to 27 MeV at the Triangle Universities Nuclear Laboratory. The first and second order Birks' constants are extracted from the data, and found to be kB = (8.70 ± 0.93)× 10−3 g/cm2/MeV and kC = (1.42 ± 1.00) × 10−5  (g/cm2/MeV)2. This result covers a unique energy range that is of direct relevance for fast neutron backgrounds in reactor inverse beta decay detectors. These measurements will improve the energy non-linearity modeling of plastic scintillator detectors. In particular, the updated energy response model will lead to an improvement of fast neutron modeling for detectors based on the CHANDLER reactor neutrino detector technology.

SUMMARYDuring the last decade the European activities in the field of nuclear fission research include the design of fast reactors cooled by liquid metals. Within this framework, the Fast REactor NEutronics/Thermal-hydraulICs (FRENETIC) code is being developed at Politecnico di Torino over the last few years. It implements a full-core coupled neutronic/thermalhydraulic model of a liquid-metal-cooled fast reactor as relevant for two of the six options currently under study within the framework of the Generation-IV International Forum, namely the lead-cooled fast reactors and the sodium-cooled fast reactors. The code validation process involves the participation in a coordinated research project of the International Atomic Energy Agency, aiming at testing different computational tools against the shutdown heat removal tests performed many years ago in the sodium-cooled Experimental Breeder Reactor-II (EBR-II) at Argonne National Laboratory, USA. In this paper, results of the FRENETIC analysis of one of the transients considered in the project, the unprotected EBR-II shutdown heat removal test SHRT-45R, are presented and compared to the measurements, providing the first validation of the coupled neutronic/thermal-hydraulic features of the FRENETIC code.

No abstract

No abstract