Solar vapour generation is an efficient way of harvesting solar energy for the purification of polluted or saline water. However, water evaporation suffers from either inefficient utilization of solar energy or relies on complex and expensive light-concentration accessories. Here, we demonstrate a hierarchically nanostructured gel (HNG) based on polyvinyl alcohol (PVA) and polypyrrole (PPy) that serves as an independent solar vapour generator. The converted energy can be utilized in situ to power the vaporization of water contained in the molecular meshes of the PVA network, where water evaporation is facilitated by the skeleton of the hydrogel. A floating HNG sample evaporated water with a record high rate of 3.2 kg m h via 94% solar energy from 1 sun irradiation, and 18-23 litres of water per square metre of HNG was delivered daily when purifying brine water. These values were achievable due to the reduced latent heat of water evaporation in the molecular mesh under natural sunlight.

Reducing human reliance on energy-inefficient cooling methods such as air conditioning would have a large impact on the global energy landscape. By a process of complete delignification and densification of wood, we developed a structural material with a mechanical strength of 404.3 megapascals, more than eight times that of natural wood. The cellulose nanofibers in our engineered material backscatter solar radiation and emit strongly in mid-infrared wavelengths, resulting in continuous subambient cooling during both day and night. We model the potential impact of our cooling wood and find energy savings between 20 and 60%, which is most pronounced in hot and dry climates.

No abstract

Researchers transformed natural wood into a super thermal insulation structural material with aligned cellulose nanofibers.

Solar steam generation is regarded as one of the most sustainable techniques for desalination and wastewater treatment. However, there has been a lack of scalable material systems with high efficiency under 1 Sun. A solar steam generation device is designed utilizing crossplane water transport in wood via nanoscale channels and the preferred thermal transport direction is decoupled to reduce the conductive heat loss. A high steam generation efficiency of 80% under 1 Sun and 89% under 10 Suns is achieved. Surprisingly, the crossplanes perpendicular to the mesoporous wood can provide rapid water transport via the pits and spirals. The cellulose nanofibers are circularly oriented around the pits and highly aligned along spirals to draw water across lumens. Meanwhile, the anisotropic thermal conduction of mesoporous wood is utilized, which can provide better insulation than widely used super‐thermal insulator Styrofoam (≈0.03 W m−1 K−1). The crossplane direction of wood exhibits a thermal conductivity of 0.11 W m−1 K−1. The anisotropic thermal conduction redirects the absorbed heat along the in‐plane direction while impeding the conductive heat loss to the water. The solar steam generation device is promising for cost‐effective and large‐scale application under ambient solar irradiance.