Abstract-The Routing Protocol for Low Power and Lossy Networks (RPL) has become the standard routing protocol for the Internet of Things (IoT). This paper investigates the use of RPL in dynamic networks and presents an enhanced RPL for different applications with dynamic mobility and diverse network requirements. This implementation of RPL is designed with a new dynamic Objective-Function (D-OF) to improve the Packet Delivery Ratio (PDR), end-to-end delay and energy consumption while maintaining low packet overhead and loop-avoidance. We propose a controlled reverse-trickle timer based on received signal strength identification (RSSI) readings to maintain high responsiveness with minimum overhead and consult the objective function when a movement or an inconsistency is detected to help nodes make an informed decision. Simulations are done using Cooja with random waypoint mobility scenario for healthcare applications considering multi-hop routing. The results show that the proposed dynamic RPL (D-RPL) adapts to the nodes mobility and has a higher PDR, slightly lower end-to-end delay and reasonable energy consumption compared to related existing protocols.

Abstract-IPv6 over low power wireless personal area network (6LoWPAN) is promising to be used in many different IoT applications. Recently, many protocols have been proposed for 6LoWPAN networks such as RPL routing protocol which is developed by the ROLL working group and expected to be the standard routing protocol for 6LoWPAN. Many problems are facing 6LoWPAN as it connects to the Internet such as congestion. In this paper, we propose a new RPL routing metric called Buffer Occupancy which reduces the number of lost packets due to buffer overflow when congestion does occur. Also, a new RPL objective function called Congestion-Aware Objective Function (CA-OF) is presented. The proposed objective function works efficiently when congestion occurs by selecting less congested paths. Simulation results show that CA-OF improves performance in the presence of congestion by an overall average of 37.4% in term of number of lost packets, throughput, packet delivery ratio and energy consumption.

The Internet of Things (IoT) is the next big challenge for the research community where the IPv6 over low power wireless personal area network (6LoWPAN) protocol stack is a key part of the IoT. Recently, the IETF ROLL and 6LoWPAN working groups have developed new IP based protocols for 6LoWPAN networks to alleviate the challenges of connecting low memory, limited processing capability, and constrained power supply sensor nodes to the Internet. In 6LoWPAN networks, heavy network traffic causes congestion which significantly degrades network performance and impacts on quality of service (QoS) aspects such as throughput, latency, energy consumption, reliability, and packet delivery. In this paper, we overview the protocol stack of 6LoWPAN networks and summarize a set of its protocols and standards. Also, we review and compare a number of popular congestion control mechanisms in wireless sensor networks (WSNs) and classify them into traffic control, resource control, and hybrid algorithms based on the congestion control strategy used. We present a comparative review of all existing congestion control approaches in 6LoWPAN networks. This paper highlights and discusses the differences between congestion control mechanisms for WSNs and 6LoWPAN networks as well as explaining the suitability and validity of WSN congestion control schemes for 6LoWPAN networks. Finally, this paper gives some potential directions for designing a novel congestion control protocol, which supports the IoT application requirements, in future work.

Abstract-Realizing the target of high reliability and availability is a crucial concept in the IoT context. Different types of IoT applications introduce several requirements and obstacles. One of the important aspects degrading network performance is the node mobility inside the network. Without a solid and adaptive mechanism, node mobility can disrupt the network performance due to dissociations from the network. Hence, reliable techniques must be incorporated to tackle the overhead of node movement. In this paper, the overhead of mobility on both IEEE 802.15.4e timeslotted channel hopping (TSCH) and low latency deterministic (LLDN) modes is investigated. These two modes can be considered as the MAC layer of the IoT paradigm because of their importance and resilience to different network obstacles. In addition, the set of metrics and limitations that influence the network survivability will be identified to ensure efficient mobile node handling process. Both TSCH and LLDN have been implemented via the Contiki OS to determine their functionality. TSCH has been demonstrated to have better node connectivity due to the impact of frame collision in LLDN. In addition, by neglecting the overhead of collision, the LLDN has been shown to have better connectivity and low radio duty cycle (RDC).Index Terms-IEEE 802.15.4e, TSCH, LLDN, Node mobility, Contiki OS.

No abstract