The most important link in the system of measures to ensure a high culture of agriculture and obtaining high yields of melons and gourds is tillage. Success in the cultivation of melons and gourds largely depends on the period and quality of tillage, and tillage depends on the methods of its implementation and the perfection of machine design. The aim of the study is to justify the optimal design of the energy-resource-saving combined machine for preparing the soil for sowing of melons and gourds, and the parameters of its carcasses based on the theory of the interaction of carcasses with the soil layer. The paper proposed a new technology for preparing the soil for sowing melons and gourds in a single pass of the unit, including loosening the aisle between adjacent planting zones, simultaneous formation of irrigation furrow by turning the layers of the planting zone relative to each other, strip loosening the subsurface soil layers and preparing the soil for sowing seeds along the sowing line. The paper presents the design of the developed combined machine for the implementation of the proposed technology. The types and mutual arrangement of the working parts of the machine are theoretically justified. It has been established that with a longitudinal distance from the toe of the plowshare of the combination unit to a flat-cutter 35.1 cm, a longitudinal distance between flat-cutters 42.3 cm and a minimum longitudinal distance between the support wheel and a flat-cutter 24.1 cm, the field is prepared for sowing of melons with minimal costs energy.
The combined machine allows qualitatively preparing the soil for sowing melon crops with minimum energy consumption. The efficiency of the combined machine depends on the type, location of the tiller relative to the body, and its parameters. The purpose of the study is to justify the type and parameters of the tiller combination machine to prepare the soil for sowing melon crops. In researches methods of classical mechanics are applied. The construction of the combined machine with soil cultivators is given. Based on the theory of soil destruction wedge determined the main parameters of the soil tinker. Experimental research of different types of soil cultivators is carried out. it is established that at the performance of soil cultivator of the combined unit in the form of a three-sided wedge with an inclined stand, the minimum longitudinal distance from a ploughshare of the case to soil cultivator is 52.7 cm, transverse distance from the field cut of the hull to the tiller bit is 15 cm, width and length of the tiller bit is 5 and 14 cm respectively, cutting angle of the bit is 18 degrees, quality crushing of sub-powder soil layers with minimum energy consumption is provided.
One of the reasons hindering potato farming development on Uzbekistan's farms is the low supply of inexpensive mini-production equipment for harvesting potatoes. The use of high-performance potato harvesters in small areas is uneconomical. The authors proposed a potato digger with a digging working body of the "Paraplaw" type. The study aims to develop a potato digger with working bodies of the "Paraplaw" type. A prototype of a mini potato harvester was made, and its economic tests were carried out. The basic principles and methods of classical mechanics, mathematical analysis, and statistics were used in this study. The developed digging work part is made in the form of rippers with inclined racks installed towards each other, and their chisels are equipped with ripping elements in the form of rods. The results of the digger tests have been given. It was found that during the operation of the improved potato digger, tuber losses were reduced by 2.9%, and productivity increased by 13.2% compared to the serial one.
The purpose of the study is to substantiate the method and design scheme of a combined machine for preparing the soil and sowing melons. The authors propose a new method of soil preparation and sowing, as well as a machine for its implementation. The basic principles and methods of classical mechanics, mathematical analysis, and statistics were used in this study. The method of preparing the soil and planting gourds provides a combination of the following technological processes: the turnover of the layers of the upper layer of soil, the sowing area to the left and to the right, shallow tilling the soil of the field with the left and right sides of the sowing area, deep tillage seeding areas with simultaneous formation of irrigation furrows and the local application of fertilizers, soil preparation for sowing in line sowing and sowing seeds of melons. The machine consists of lister housings installed along the axis of symmetry of the unit, flat cutters, parallel-type deep-diggers, furrowers, coulters for fertilizing, and a sowing device. It was found that preparation of soil for sowing and planting of melons with a minimum expenditure of energy is provided by the width of Lusternik buildings 86 cm, the width of tillers and cultivators, respectively, 45 and 33 cm, the longitudinal distance between the body and the plane of 35 cm between the cultivators of 42.3 cm, and longitudinal spacing of the chisel cultivator and sowing device 110 cm.
Subsoils are widely used on tillage and combination machines. The tiller of the combined machine for preparing the soil for sowing melons and gourds carries out strip loosening of the subsoil layers. The study aims to theoretically determine the traction resistance of a soil deepener of a combined machine for preparing the soil for sowing melons and gourds. The study uses the basic provisions of mathematics, theoretical mechanics, and agricultural mechanics. In studies, it is assumed that the destruction of the soil under the influence of the drill bit occurs by separation. The total traction resistance of the subsoiler was determined as the sum of the resistance of the rack and the bit. An analytical expression has been obtained to determine the traction resistance of a tilting machine with an inclined stand, depending on its design, technological parameters, and the physical and mechanical properties of the soil. As a result of theoretical studies, it was found that the traction resistance of the soil deepener is mainly influenced by its design parameters, the depth of soil cultivation, the physical and mechanical properties of the soil, and the speed of the machine.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.
customersupport@researchsolutions.com
10624 S. Eastern Ave., Ste. A-614
Henderson, NV 89052, USA
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.
Copyright © 2024 scite LLC. All rights reserved.
Made with 💙 for researchers
Part of the Research Solutions Family.