In this paper, low-impedance lateral–extensional microresonators are fabricated on a stack of aluminum nitride (AlN) directly deposited on a polished ultrananocrystalline diamond (UNCD) film. The large acoustic velocity of UNCD is utilized to extend the frequency of such resonators beyond 1 GHz while the frequency-defining features are not reduced excessively. In order to promote the growth of a <jats:formula formulatype="inline"><jats:tex Notation="TeX">$c$</jats:tex> </jats:formula>-plane piezoelectric AlN film, the surface of the UNCD film is polished after deposition. Three different UNCD films with different Young's modulus values were prepared, and frequencies up to two times that of similar devices fabricated on silicon have been achieved. The finite-element analysis is employed to evaluate the effect of various physical parameters on the performance of the thin-film piezoelectric-on-substrate resonators in order to achieve very low motional resistance <jats:formula formulatype="inline"><jats:tex Notation="TeX" >$(R_{m})$</jats:tex></jats:formula>. Several resonators were designed with various lateral dimensions and different numbers of support tethers to evaluate the propositions. The lowest <jats:formula formulatype="inline"><jats:tex Notation="TeX" >$R_{m}$</jats:tex></jats:formula> was measured from a multitethered 29th-order thin-film piezoelectric-on-diamond (TPoD) resonator (22 <jats:formula formulatype="inline"><jats:tex Notation="TeX"> $Omega$</jats:tex></jats:formula>) and <jats:formula formulatype="inline"><jats:tex Notation="TeX">$fcdot Q$</jats:tex></jats:formula> product of <jats:formula formulatype="inline"><jats:tex Notation="TeX">$2.72 ast 10^{12}$</jats:tex></jats:formula> at 888 MHz. The temperature coefficient of frequency of this TPoD resonator is measured to be <jats:formula formulatype="inline"><jats:tex Notation="TeX">$-9.6 hbox{ppm}/^{circ} hbox{C}$</jats:tex></jats:formula>, which is much lower than that of the devices fabricated on silicon. Also, this device can withstand input powers up to <jats:formula formulatype="inline"><jats:tex Notation="TeX">$+$</jats:tex></jats:formula>27 dBm, leading to a delivered power density per unit area of <jats:formula formulatype="inline" ><jats:tex Notation="TeX">$sim!!2.9 muhbox{W}/muhbox{m}^{2}$</jats:tex> </jats:formula>.<jats:formula formulatype="inline"><jats:tex Notation="TeX" >$hfill$</jats:tex></jats:formula>[2012-0099]

No abstract

No abstract

No abstract

In this work, lateral-extensional thin-film piezoelectric- on-diamond (TPoD) filters with very low insertion loss (IL) values (<4 dB) are reported. Two different lateral-extensional modes of a resonant structure are coupled together to realize a two-pole filter. The filters of this work exhibit low IL values, with fractional bandwidth between 0.08% and 0.2%, and have a very small footprint. This paper reports on the lowest IL in the literature for lateral-extensional thin-film piezoelectric filters with 50 Ω terminations in the GSM frequency band (~900 MHz). The narrow-band filters of this work are fabricated on three ultrananocrystalline diamond substrates to achieve higher frequencies without excessive reduction in the feature size. The paper also thoroughly studies the parameters that affect the performance of such filters and then discussions are evaluated by the statistical data collected from the fabricated wafers.