No abstract

Growth of biofilms of G. sulfurreducens on glassy carbon that yield a bioelectrocatalytic response to acetate oxidation is achieved using a fixed applied potential, with current density for acetate oxidation scaling with applied potential. In contrast biofilms grown under electron acceptor-limiting conditions display redox signals shifted to lower potentials and do not oxidise acetate.

A new anaerobic treatment system that combined a microbial electrolysis cell (MEC) with membrane filtration using electrically conductive, porous, nickel-based hollow-fiber membranes (Ni-HFMs) was developed to treat low organic strength solution and recover energy in the form of biogas. This new system is called an anaerobic electrochemical membrane bioreactor (AnEMBR). The Ni-HFM served the dual function as the cathode for hydrogen evolution reaction (HER) and the membrane for filtration of the effluent. The AnEMBR system was operated for 70 days with synthetic acetate solution having a chemical oxygen demand (COD) of 320 mg/L. Removal of COD was >95% at all applied voltages tested. Up to 71% of the substrate energy was recovered at an applied voltage of 0.7 V as methane rich biogas (83% CH4; <1% H2) due to biological conversion of the hydrogen evolved at the cathode to methane. A combination of factors (hydrogen bubble formation, low cathode potential and localized high pH at the cathode surface) contributed to reduced membrane fouling in the AnEMBR compared to the control reactor (open circuit voltage). The net energy required to operate the AnEMBR system at an applied voltage of 0.7 V was significantly less (0.27 kWh/m3) than that typically needed for wastewater treatment using aerobic membrane bioreactors (1-2 kWh/m3).

Three-dimensional microchannelled nanocomposite electrodes fabricated by ice-segregation induced self-assembly of chitosan-dispersed multiwall carbon nanotubes are shown to provide a scaffold for growth of electroactive bacteria for use as acetate-oxidizing bioanodes in bioelectrochemical systems.The hierarchical structure provides a conductive surface area available for G. sulfurreducens colonization, with a flow through configuration along the electrode providing a substrate for bacterial colonization and bio-electrochemical processes. This configuration, whilst resulting in sub-monolayer biofilm coverage over the three-dimensional surface, is capable of providing acetate oxidation current densities of up to 24.5 A m À2 , equating to a volumetric current density of 19 kA m À3 , in the flow-through configuration. Such bioanodes, when operated in non-optimized flow-through microbial fuel cell configuration, provide a maximum power density of 2.87 W m À2 , which is equivalent to 2.0 kW m À3 volumetric power density.

Anaerobic ammonium oxidation (anammox) bacteria contribute significantly to the global nitrogen cycle and play a major role in sustainable wastewater treatment. Anammox bacteria convert ammonium (NH4+) to dinitrogen gas (N2) using intracellular electron acceptors such as nitrite (NO2−) or nitric oxide (NO). However, it is still unknown whether anammox bacteria have extracellular electron transfer (EET) capability with transfer of electrons to insoluble extracellular electron acceptors. Here we show that freshwater and marine anammox bacteria couple the oxidation of NH4+ with transfer of electrons to insoluble extracellular electron acceptors such as graphene oxide or electrodes in microbial electrolysis cells. 15N-labeling experiments revealed that NH4+ was oxidized to N2 via hydroxylamine (NH2OH) as intermediate, and comparative transcriptomics analysis revealed an alternative pathway for NH4+ oxidation with electrode as electron acceptor. Complete NH4+ oxidation to N2 without accumulation of NO2− and NO3− was achieved in EET-dependent anammox. These findings are promising in the context of implementing EET-dependent anammox process for energy-efficient treatment of nitrogen.