No abstract

This study characterized emissions of particulate matter (PM), volatile organic compounds (VOCs), heavy metals, and anions from Mongolian bituminous coals in a controlled heating experiment. Three coal samples from Alag Tolgoi (coal 1), Baganuur (coal 2), and Nalaikh (coal 3) were combusted at a constant heat flux of 50 kW/m2 using a dual-cone calorimeter. The coal samples were commonly used in ger district of Ulaanbaatar, Mongolia. PM10 emission factors were 1122.9 ± 526.2, 958.1 ± 584.0, and 472.0 ± 57.1 mg/kg for coal samples 1, 2, and 3, respectively. PM with a diameter of 0.35–0.45 µm was dominant and accounted for 41, 34, and 48% of the total PM for coal samples 1, 2, and 3, respectively. The emissions of PM and VOC from coals commonly used in Ulaanbaatar, Mongolia were significant enough to cause extremely high levels of indoor and outdoor air pollution.

Vinyl samples were burned in a controlled environment to determine the characteristics of particulate matter (PM) and volatile organic compound (VOC) emissions during the combustion process. Open burning of plastic or vinyl products poses several environmental and health risks in developed and developing countries, due to the release of high concentrations of harmful pollutants. The production of fine and ultrafine particles was significant. At a heat flux of 25 kW/m2, the production of PM of 0.35 μm in size was highest at 63.0 μg/m3. In comparison, at fluxes of 35 and 50 kW/m2, the production of PM of 0.45 μm in size was highest with values of 67.8 and 87.7 μg/m3, respectively. Benzene, acetone, and other toxic compounds were also identified in the analyses.