No abstract

No abstract

In this study, a high-performance AlGaN/GaN high electron mobility transistor (HEMT) is presented to improve its electrical operation by employing an inner field-plate (IFP) structure. Prior to the IFP structure analysis, we compared the measured and simulated direct current characteristics of the fabricated two-finger conventional T-shaped gate HEMTs. Then, the AlGaN/GaN HEMT with a drain-side field plate (FP) structure was suggested to enhance the breakdown voltage characteristics. The maximum breakdown voltage recorded with a 0.8 µm stretched FP structure was 669 V. Finally, the IFP structure was interfaced with the gate head of the device to compensate the radio frequency characteristics, choosing the optimum length of the drain-side FP structure. Compared to the 0.8 µm stretched FP structure, the IFP structure showed improved frequency characteristics with minimal difference to the breakdown voltage. The frequency variation caused by changing the passivation thickness was also analyzed, and the optimum thickness was identified. Thus, IFP AlGaN/GaN HEMT is a promising candidate for high-power and high-frequency applications.

The impacts of SiN/Al 2 O 3 bi-layer passivation on the carrier transport characteristics in GaN-based metal-insulator-semiconductor high electron mobility transistors (MISHEMTs) were studied. Various mechanical stresses, as measured by micro-Ramam spectroscopy, were introduced on the GaN channel according to the different passivation systems. The SiN dielectric layer deposited by plasma enhanced chemical vapor deposition on top of the GaN capping layer resulted in compressive stress. On the other hand, the Al 2 O 3 passivation layer deposited by atomic layer deposition on SiN layer generated tensile stress, which compensated the compressive stress produced by the SiN layer. The correlation between the applied mechanical stress induced by the deposited dielectric layers and device performance of the GaN-based HEMT was also investigated. When a slight tensile stress was applied on the GaN channel through the bi-layer passivation, the carrier transfer characteristics were improved in terms of carrier concentration at the AlGaN/GaN interface, as well as carrier mobility and sheet resistance compared to the high compressive stress condition. These results show that the mechanical stress engineering via optimized passivation process is a promising technique for the improvement of the device performance in GaN-based MISHEMTs.

No abstract